[Free] 2018(May) EnsurePass Braindumps Microsoft 70-412 Dumps with VCE and PDF 181-190
Configuring Advanced Windows Server 2012 R2 Services
Question No: 181 DRAG DROP – (Topic 3)
Your network contains four servers that run Windows Server 2012 R2.
Each server has the Failover Clustering feature installed. Each server has three network adapters installed. An iSCSI SAN is available on the network.
You create a failover cluster named Cluster1. You add the servers to the cluster.
You plan to configure the network settings of each server node as shown in the following table.
You need to configure the network settings for Cluster1. What should you do?
To answer, drag the appropriate network communication setting to the correct cluster
network. Each network communication setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Allow cluster network communication for heartbeats. Note: Heartbeats
The Cluster service, running on each node of the cluster, keeps track of the current state of the nodes within a cluster and determines when a group and its resources fail over to an alternate node. This communication takes the form of messages that are sent regularly between each node#39;s Cluster service. These messages are called heartbeats.
Question No: 182 – (Topic 3)
Your network contains two servers named Server1 and Server 2. Both servers run Windows Server 2012 R2 and have the Hyper-V server role installed.
Server1 hosts a virtual machine named VM1. The virtual machine configuration files and the virtual hard disks for VM1 are stored in D: \VM1.
You shut down VM1 on Server1.
You copy D:\VM1 to D:\VM1 on Server2.
You need to start VM1 on Server2. You want to achieve this goal by using the minimum amount of administrative effort.
What should you do?
Run the Import-VMIntialReplication cmdlet.
Create a new virtual machine on Server2 and attach the VHD from VM1 to the new virtual machine.
From Hyper-V Manager, run the Import Virtual Machine wizard.
Run the Import-IscsiVirtualDisk cmdlet.
Answer: C Explanation:
Starting in Windows Server 2012, you no longer need to export a virtual machine to be able to import it. You can simply copy a virtual machine and its associated files to the new host, and then use the Import Virtual Machine wizard to specify the location of the files. This registers the virtual machine with Hyper-V and makes it available for use.
In addition to the wizard, the Hyper-V module for Windows PowerShell includes cmdlets for importing virtual machines. For more information, see Import-VM
Reference: Overview of exporting and importing a virtual machine
Question No: 183 – (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2.
From Server Manager, you install the Active Directory Certificate Services server role on Server1.
A domain administrator named Admin1 logs on to Server1.
When Admin1 runs the Certification Authority console, Admin1 receives the following error message.
You need to ensure that when Admin1 opens the Certification Authority console on Server1, the error message does not appear.
What should you do?
Run the Install-AdcsCertificationAuthority cmdlet.
Install the Active Directory Certificate Services (AD CS) tools.
Modify the PATH system variable.
Add Admin1 to the Cert Publishers group.
Answer: B Explanation:
Cannot manage Active Directory Certificate Services The error message is related to missing role configuration.
Cannot Manage Active Directory Certificate Services
Resolution: configure the two Certification Authority and Certification Authority Web Enrollment Roles.
Active Directory Certificate Services (AD CS) is an Active Directory tool that lets administrators customize services in order to issue and manage public key certificates.
AD CS included:
CA Web enrollment – connects users to a CA with a Web browser
Certification authorities (CAs) – manages certificate validation and issues certificates Etc.
Not A. The CA is installed, it just need to be configured correctly. Note: Install-AdcsCertificationAuthority
The Install-AdcsCertificationAuthority cmdlet performs installation and configuration of the AD CS CA role service.
Reference: Cannot manage Active Directory Certificate Services in Server 2012 Error 0x800070002; Active Directory Certificate Services (AD CS) Definition
Question No: 184 HOTSPOT – (Topic 3)
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 have the Hyper-V server role installed.
Server1 and Server2 have different processor models from the same manufacturer.
On Server1, you plan to create a virtual machine named VM1. Eventually, VM1 will be exported to Server2.
You need to ensure that when you import VM1 to Server2, you can start VM1 from saved snapshots.
What should you configure on VM1?
To answer, select the appropriate node in the answer area.
Use the Processor Compatibility Mode only in cases where VMs will migrate from one Hyper-V-enabled processor type to another within the same vendor processor family.
Question No: 185 – (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC2 that runs Windows Server 2012 R2. DC2 has the DHCP Server server role installed.
DHCP is configured as shown in the exhibit. (Click the Exhibit button.)
You discover that client computers cannot obtain IPv4 addresses from DC2.
You need to ensure that the client computers can obtain IPv4 addresses from DC2. What should you do?
Disable the Deny filters.
Enable the Allow filters.
Restart the DHCP Server service
Answer: C Explanation:
From the exhibit we see a red marker on the IPv4 server icon. The DHCP server is not authorized.
Authorize DHCP Server
The final step is to authorize the server. Right-click your FQDN and select Authorize.
Refresh the view by right-clicking your FQDN and selecting Refresh. You should now see green check mark next to IPv4.
Reference: Server 2012 DHCP Server Role
Question No: 186 – (Topic 3)
Your network contains one Active Directory domain. The domain contains two Hyper-V hosts named Host1 and Host2 that run Windows Server 2012 R2.
Host1 contains a virtual machine named VM1. You plan to move VM1 to Host2.
You need to generate a report that lists any configuration issues on Host2 that will prevent VM1 from being moved successfully.
Which cmdlet should you use?
Answer: C Explanation:
The Compare-VM cmdlet compares a virtual machine and a virtual machine host for compatibility, returning a compatibility report. This is useful when trying to import or migrate a virtual machine that is incompatible with the target Hyper-V server.
Reference: Technet, Compare-VM
Question No: 187 – (Topic 3)
You have a DHCP server named Server1 that runs Windows Server 2012 R2.
Server1 has two scopes named Production and Development. Currently, all DHCP clients register their host name in a DNS zone named contoso.com.
You need to ensure that only the clients that obtain an IP address from the Development scope, register their host name in a DNS zone named dev.contoso.com.
What should you do?
Run the Set-DHCPServerv4Binding cmdlet.
Modify the Advanced settings of the Development scope.
Modify the Advanced settings of the DHCP server.
Create a DHCP policy for the Development scope.
Answer: D Explanation:
DHCP policies can be defined server wide or for a specific scope. Any DNS registration
behavior of the DHCP server which can be configured server wide or on a per scope basis
for example, turn on/off the DNS registration (and deregistration) or DNS name protection
can be configured on a per policy basis.
Reference: DHCP Policies in Windows Server 2012
Question No: 188 – (Topic 3)
You have two Hyper-V hosts named Host1 and Host2 that run Windows Server 2012 R2. Host1 hosts a virtual machine named VM1 that is replicated to Host2. VM1 hosts an internal web application.
You need to test the failover of VM1 to Host2. The solution must ensure that clients continue to connect to VM1 on Host1.
Which cmdlet should you run?
Answer: A Explanation:
Creates a test virtual machine using the chosen recovery point. You can use a test virtual machine to validate a Replica virtual machine. To stop a test failover, use the Stop- VMFailover cmdlet.
The Start-VMFailover cmdlet can be used for the following tasks:
->Fail over a Replica virtual machine to a chosen recovery point.
->Start a planned failover on a primary virtual machine.
->Create a test virtual machine on a Replica virtual machine.
Question No: 189 – (Topic 3)
Your network contains an Active Directory forest named adatum.com. The forest contains an Active Directory Rights Management Services (AD RMS) cluster.
A partner company has an Active Directory forest named litwareinc.com. The partner company does not have AD RMS deployed.
You need to ensure that users in litwareinc.com can consume rights-protected content from adatum.com.
Which type of trust policy should you create?
At federated trust
A trusted user domain
A trusted publishing domain
Windows Live ID
Answer: A Explanation:
In AD RMS rights can be assigned to users who have a federated trust with Active Directory Federation Services (AD FS). This enables an organization to share access to rights-protected content with another organization without having to establish a separate Active Directory trust or Active Directory Rights Management Services (AD RMS) infrastructure.
Question No: 190 DRAG DROP – (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains four member servers named Server1, Server2, Server3, and Server4. Server1 and Server2 run Windows Server 2008 R2.
Server1 and Server2 have the Hyper-V server role and the Failover Clustering feature installed. Failover
Clustering is configured to provide highly available virtual machines by using a cluster named Cluster1.
Cluster1 hosts 10 virtual machines.
Server3 and Server4 run Windows Server 2012 R2.
You install the Hyper-V server role and the Failover Clustering feature on Server3 and Server4. You create a cluster named Cluster2.
You need to migrate cluster resources from Cluster1 to Cluster2. The solution must minimize downtime on the virtual machines.
Which five actions should you perform?
To answer, move the appropriate five actions from the list of actions to the answer area and arrange them in the correct order.
Move Highly Available (Clustered) VMs to Windows Server 2012 with the Cluster Migration Wizard
On the Windows Server 2012 cluster – the target cluster – from the Failover Cluster Manger, select a cluster and then use theMore Actions | Migrate Roles… menu to launch the Cluster Migration Wizard:
Shutdown all VMs on the source Windows Server 2008 R2 cluster that have been migrated.
Unmask the common shared storage (LUNs) so that they are not presented to the Windows Server 2008 R2source cluster
Mask the common shared storage (LUNs) to the Windows Server 2012 target cluster.
Start all VMs on the target Windows Server 2012 cluster.
EnsurePass ExamCollection Testking Lowest Price Guarantee Yes No No Up-to-Dated Yes No No Real Questions Yes No No Explanation Yes No No PDF VCE Yes No No Free VCE Simulator Yes No No Instant Download Yes No No