[Free] 2018(Mar) EnsurePass Passguide Microsoft 70-410 Dumps with VCE and PDF 111-120
Installing and Configuring Windows Server 2012
Question No: 111 – (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2.
You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the installation fails repeatedly.
You need to ensure that the feature can be installed on Server1. What should you do?
Install Windows Identity Foundation (WIF) 3.5.
Install the Web Server (IIS) server role.
Connect Server1 to the Internet.
Run the Add-AppxProvisionedPackage cmdlet.
Answer: C Explanation:
The files needed are no longer available on the local Hard drive. We need to connect the server to the Internet.
Important to note that when starting with Windows Server 2012 R2 and Windows 8, the feature files for .NET Framework 3.5 (which includes .NET Framework 2.0 and .NET Framework 3.0) are not available on the local computer by default. The files have been removed. Files for features that have been removed in a Features on Demand configuration, along with feature files for .NET Framework 3.5, are available through Windows Update. By default, if feature files are not available on the destination server that is running Windows Server 2012 R2 Preview or Windows Server 2012 R2, the installation process searches for the missing files by connecting to Windows Update. You can override the default behavior by configuring a Group Policy setting or specifying an alternate source path during installation, whether you are installing by using the Add Roles and Features Wizard GUI or a command line.
Question No: 112 – (Topic 2)
You have a print server named Print1 that runs Windows Server 2012 R2. Print1 has 10 shared printers. You need to change the location of the spool folder.
What should you modify?
The properties of the Print Spooler service
The Print Server Properties
The user environment variables
The PrintQueue.inf file
Question No: 113 DRAG DROP – (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2. You add a new internal SAS disk to Server1.
You need to ensure that the new disk is available to store files. Which three cmdlets should you run in sequence?
To answer, move the appropriate three cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
Box 1: Initialize-Disk
Box 2: New-Partition Box 3: Format Volume
* The following script accomplishes these four tasks (listed below):
Initialize-Disk -PartitionStyle MBR -PassThru |
New-Partition -AssignDriveLetter -UseMaximumSize |
Format-Volume -FileSystem NTFS -NewFileSystemLabel quot;disk2quot; -Confirm:$false
* Use PowerShell to Initialize Raw Disks and to Partition and Format Volumes
With Windows PowerShell 3.0 in Windows 8 or Windows Server 2012, I can perform all of these operations via Windows PowerShell functions from the Storage modulE. The process is the same as I would do via the Disk Management tool. The steps are:
Get the disk that has a raw partition stylE. Initialize the disk.
Partition the disk. Format the volumE.
* Serial Attached SCSI (SAS) is a point-to-point serial protocol that moves data to and from computer storage devices such as hard drives and tape drives.SAS replaces the older Parallel SCSI (Small Computer System Interface, pronounced quot;scuzzyquot;), bus technology
that first appeared in the mid-1980s.SAS, like its predecessor, uses the standard SCSI command set.SAS offers backward compatibility with SATA, versions 2 and later. This allows for SATA drives to be connected to SAS backplanes. The reverse, connecting SAS drives to SATA backplanes, is not possible.
Question No: 114 – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1).Both servers are member servers.
On Server2, you install all of the software required to ensure that Server2 can be managed remotely from Server Manager.
You need to ensure that you can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform on Server2? (Each correct answer presents part of the solution.Choose two.)
Run the systempropertiesremote. execommand.
Run the Fnable-PsRemoting cmdlet.
Run the Enable-PsSessionConfigurationcmdlet.
Run the Confiqure-SMRemoting.ps1script.
Run the Set-ExecutionPolicycmdlet.
Answer: D,E Explanation:
The output of this command indicates whether Server Manager Remoting is enabled or disabled on the server. To configure Server Manager remote management by using Windows PowerShell
On the computer that you want to manage remotely, open a Windows PowerShell session with elevated user rights.To do this, click Start, click All Programs, click Accessories, click Windows PowerShell, right-click the Windows PowerShell shortcut, and then click Run as administrator.
In the Windows PowerShell session, type the following, and then press Enter.
Type the following, and then press Enter to enable all required firewall rule exceptions. Configure-SMRemoting.ps1 -force -enable.
Question No: 115 DRAG DROP – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs a Server Core installation of Windows Server 2012 R2.
You install the DNS Server server role on Server1.
You need to perform the following configurations on Server1:
->Create an Active Directory-integrated zone named adatum.com.
->Send unresolved DNS client queries for other domain suffixes to the DNS server of your company#39;s Internet Service Provider (ISP).
Which Windows PowerShell cmdlets should you use?
To answer, drag the appropriate cmdlet to the correct configuration in the answer area. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Add-DnsServerDirectoryPartition: Creates a DNS application directory partition. Add-DnsServerPrimaryZone: Adds a primary zone to a DNS server.
Set-DNSServer Overwrites a DNS server configuration.
SET-DNSServerForwarder Changes forwarder settings on a DNS server Set-DNSServerDSSetting Modifies DNS Active Directory settings.
Set-DNSServerSetting Modifies DNS server settings.
http://technet.microsoft.com/en-us/library/jj649942(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj649876(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj649845(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj649887(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj649874.aspx http://technet.microsoft.com/en-us/library/jj649909.aspx
Question No: 116 – (Topic 2)
Your network contains a Windows Server 2012 R2 image named Server12.wim.Server12.wim contains the images shown in the following table.
You need to enable the Windows Server Migration Tools feature in the Windows Server 2012 R2 Datacenter image.
You want to achieve this goal by using the minimum amount of administrative effort. Which command should you run first?
dism.exe /image:c:\Server12.wim /enable-feature /featurename:servermigration
dism.exe /mount-wim /wimfile:c:\Server12.wim /index:4 /mountdir:c:\mount
imagex.exe /capture c: c:\Server12.wim quot;windows server 2012 r2 datacenterquot;
imagex.exe /apply c:\Server12.wim 4 c:\
Answer: B Explanation:
This command will mount the image before making any changes. References:
Question No: 117 – (Topic 2)
Your network contains an Active Directory domain named contoso.com.
All of the AppLocker policy settings for the member servers are configured in a Group Policy object (GPO) named GPO1.
A member server named Server1 runs Windows Server 2012 R2.
On Server1, you test a new set of AppLocker policy settings by using a local computer policy.
You need to merge the local AppLocker policy settings from Server1 into the AppLocker policy settings of GPO1.
What should you do?
From Local Group Policy Editor on Server1, export an .inf file. Import the .inf file by using Group Policy Management Editor.
From Server1, run the Set-ApplockerPolicy cmdlet.
From Local Group Policy Editor on Server1, export an .xml file. Import the .xml file by using Group Policy Management Editor.
From Server1, run the New-ApplockerPolicy cmdlet.
Answer: B Explanation:
The Set-AppLockerPolicy cmdlet sets the specified Group Policy Object (GPO) to contain the specified AppLocker policy. If no Lightweight Directory Access Protocol (LDAP) is specified, the local GPO is the default.
When the Merge parameter is used, rules in the specified AppLocker policy will be merged with the AppLocker rules in the target GPO specified in the LDAP path. The merging of policies will remove rules with duplicate rule IDs, and the enforcement setting specified by the AppLocker policy in the target GPO will be preserved. If the Merge parameter is not specified, then the new policy will overwrite the existing policy.
Exam Ref 70-410: Installing and configuring Windows Server 2012 R2, Chapter 10: Implementing Group Policy, Lesson1: Planning, Implementing and managing Group Policy, p. 479
Question No: 118 HOTSPOT – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server that runs Windows Server 2012 R2.
You perform a Server Core Installation of Windows Server 2012 R2 on a new server. You need to ensure that you can add the new server to Server Manager on Server1.
What should you configure on the new server? To answer, select the appropriate setting in the answer area.
Explanation: You can add a computer to server manager using IP address. So you need to configure Network Settings. If the server is not member of a domain, you can admin it remotely.
8 – Network Settings
You will require a network connection to the server to manage it from a different server, therefore you need to configure the network settings to enable Remote Management.
Question No: 119 – (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has a virtual switch named RDS Virtual.
You replace all of the network adapters on Server1 with new network adapters that support single-root I/O visualization (SR-IOV).
You need to enable SR-IOV for all of the virtual machines on Server1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
On each virtual machine, modify the Advanced Features settings of the network adapter.
Modify the settings of the RDS Virtual virtual switch.
On each virtual machine, modify the BIOS settings.
Delete, and then recreate the RDS Virtual virtual switch.
On each virtual machine, modify the Hardware Acceleration settings of the network adapter.
Answer: D,E Explanation:
The first step when allowing a virtual machine to have connectivity to a physical network is to create an external virtual switch using Virtual Switch Manager in Hyper-V Manager. The additional step that is necessary when using SR-IOV is to ensure the checkbox is checked when the virtual switch is being created. It is not possible to change a “non SR-IOV mode” external virtual switch into an “SR-IOV mode” switch. The choice must be made a switch creation time. Thus you should first delete the existing virtual switch and then recreate it.
E: Once a virtual switch has been created, the next step is to configure a virtual machine. SR-IOV in Windows Server “8” is supported on x64 editions of Windows “8” as a guest operating system (as in Windows “8” Server, and Windows “8” client x64, but not x86 client).We have rearranged the settings for a virtual machine to introduce sub-nodes under a network adapter, one of which is the hardware acceleration node. At the bottom is a checkbox to enable SR-IOV.
Question No: 120 – (Topic 2)
You are configuring the IPv6 network infrastructure for a branch office.
The corporate network administrator allocates the 2001:DB8:0:C000::/58 address space for use in the branch office.
You need to identify the maximum number of IPv6 subnets you can create. How many IPv6 subnets should you identify?
64 C. 128 D. 1024
Answer: B Explanation:
IPv6 has 128-bit (16-byte) source and destination IP addresses. Although 128 bits can express over 3.4脳1038 possible combinations, the large address space of IPv6 has been designed for multiple levels of subnetting and address allocation from the Internet backbone to the individual subnets within an organization.
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|