[Free] 2018(Mar) EnsurePass Examcollection Cisco 400-151 Dumps with VCE and PDF 161-170

Author: April 17, 2018

400-151 Latest Exam (Mar 2018)

,

Ensurepass.com : Ensure you pass the IT Exams
2018 Mar Cisco Official New Released 400-151
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/400-151.html

CCIE Data Center (v2.0)

Question No: 161 – (Topic 2)

On a Cisco Nexus 7000 Series Switch, what is the purpose of this command?

Switch# config terminal

switch(config)# mac address-table learning-mode conversational vlan 1-10 switch(config)#

  1. Enable conversational learning on FabricPath vlans 1-10 for F-Series module

  2. Enable FabricPath protocol on VLANs 1-10

  3. No need for this command as conversational learning is enabled by default for all VLANs.

  4. Enable conversational learning on Classical Ethernet VLAN for F-Series module

Answer: A

Question No: 162 – (Topic 2)

Which two connectivity modes does Cisco RISE support? (Choose 2)

  1. Directly connected. No virtual port channel is supported.

  2. Indirectly connected. Only Layer 3 adjacent.

  3. Indirectly connected. Only Layer 2 adjacent

  4. Indirectly connected. Layer 2 and Layer 3 adjacent.

  5. Directly connected. Virtual port channel is supported.

Answer: C,E

Question No: 163 – (Topic 2)

Which two characteristics can you tell about the device connected on el/1 from the output from the Cisco UCS CLI? (Choose 2)

  1. The device is a B-Series server.

  2. This device supports PoE.

  3. This device supports FCoE.

  4. The device is a C-Series server.

  5. The device supports Ethernet only.

Answer: A,C

Question No: 164 DRAG DROP – (Topic 2)

Drag and drop the actions in the left column into the right column in the order in which you would perform those actions in a step-by-step in-service software upgrade process.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Upgrade the BIOS on the active supervisor, standby supervisor, and line cards Bring up the standby supervisor with the new image

Initiate a supervisor switchover (active-standby)

Bring up the originally active supervisor with the new image Perform hitless upgrades on line cards one at a time Upgrade the CMP BIOS Image

Ref:http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/nx- os/upgrade/guide/b_Cisco_Nexus_7000_Series_NX- OS_Software_Upgrade_and_Downgrade_Guide_Release_6-x.html

Question No: 165 – (Topic 2)

Which statement about the converged network adapter is true?

  1. The converged network adapter is a multifunction adapter that combines the functions of Ethernet NICs and Fibre Channel host bus adapters.

  2. The converged network adapters are compatible only with Cisco UCS.

  3. The converged network adapter is a virtualized multifunction adapter that combines the

    functions of Ethernet NICs and iSCSI on the same card.

  4. The converged network adapter is a multifunction adapter that works with multiple network speeds and duplex settings, and it supports several storage and network protocols.

Answer: A

Explanation: Ref: http://www.cisco.com/c/en/us/products/collateral/switches/nexus-5000- series-switches/data_sheet_c78-618603.html

Question No: 166 – (Topic 2)

Which option is the advantage of Cisco ACE SSL Offload?

  1. Export cipher suite

  2. Decentralized certificate management

  3. SSL encryption only

  4. Front-end SSL

Answer: D Explanation:

Ref: SSL Guide vA5(1.0)

Question No: 167 DRAG DROP – (Topic 2)

Drag and drop the mode of operation on left onto the correct definition on right.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Power supply and input source redundancy (full redundancy) Combined

Power supply redundancy (N 1)

Input source redundancy (grid redundancy) Ref:http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series- switches/Data_Sheet_C78-437761.html

Question No: 168 – (Topic 2)

In the Cisco FabricPath domain, one switch becomes the root for the multidestination tree. Cisco FabricPath switches compares which three parameters to select the root? (Choose three.)

  1. Root priority

  2. System ID

  3. Bridge ID

  4. Switch ID

  5. Port ID

  6. Subswitch ID

Answer: A,B,D

Question No: 169 – (Topic 2)

Which routing protocol is implemented between leaf and spine switches to propagate external routes within the ACI fabric?

  1. static routes

  2. Border Gateway Protocol

  3. Intermediate System-to-Intermediate System

  4. Open Shortest Path First

  5. Multiprotocol Border Gateway Protocol

Answer: E

Question No: 170 – (Topic 2)

Which option required by atomic counters is required for troubleshooting endpoint connectivity?

  1. EP must be in different BD

  2. EP must be connected to different leaf switch

  3. EP must be in different EPG

  4. EP must be different VRF

  5. EP must be connected to same leaf

Answer: B

100% Ensurepass Free Download!
–Download Free Demo:400-151 Demo PDF
100% Ensurepass Free Guaranteed!
–400-151 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No