[Free] 2018(Jan) EnsurePass Passguide LPI 202-400 Dumps with VCE and PDF 131-140
LPIC-2 Exam 202, Part 2 of 2, version 4.0
Question No: 131 – (Topic 2)
What command would be used to configure the interface eth1:1 with the IP address 10
10.34 and the netmask 255.255.255.0?
A. ifconfig eth1:1 10.10.3.4 netmask 255.255.255.0 start B. ifconfig 10.10.3.4 netmask 255.255.255.0 eth1:1 up C. ifconfig eth1:1 10.10.3.4 netmask 255.255.255.0 up D. ifconfig 10.10.3.4/255.255.255.0 eth1:1 up
E. ifconfig eth1:1 10.10.3.4/255.255.255.0 up
Question No: 132 CORRECT TEXT – (Topic 2)
Which type of DNS record defines which server(s) email for a domain should be sent to?
Question No: 133 – (Topic 2)
What command is used to add a route to the 192.168.4.0/24 network via 192.168.0.2?
A. route add – network 192.168.4.0 netmask 255.255.255.0 gw 192.168.0.2
B. route add – net 192.168.4.0/24 gw 192.168.0.2
C. route add – network 192.168.4.0/24 192.168.0.2
D. route add – net 192.168.4.0 netmask 255.255.255.0 192.168.0.2
E. route add – net 192.168.4.0 netmask 255.255.255.0 gw 192.168.0.2
Question No: 134 – (Topic 2)
An SSH server is configured to use tcp_wrappers and only hosts from the class C network 192.168.1.0 should be allowed to access it. Which of the following lines would achieve this, when entered in/etc/ hosts.allow?
A. ALLOW: 192.168.1.0/255.255.255.0 : sshd B. sshd : 192.168.1.0/255.255.255.0 : ALLOW C. 192.168.1.0/255.255.255.0 : ALLOW: sshd
D. tcpD. sshd : 192.168.1.0/255.255.255.0 : ALLOW
E. sshd : ALLOW: 192.168.1.0/255.255.255.0
Question No: 135 – (Topic 2)
Which of the following can the program tripwire NOT check?
Question No: 136 CORRECT TEXT – (Topic 2)
Running tcpdump -nli eth1 #39;icmp#39; shows the following output:
11:56:35.599063 IP 192.168.123.5 gt; 18.104.22.168: icmp 64: echo request seq 1
11:56:35.670910 IP 22.214.171.124 gt; 192.168.123.5: icmp 64: echo reply seq 1
What command was used on the host 192.168.123.5, to generate this output?
Question No: 137 CORRECT TEXT – (Topic 2)
You have installed some new libraries, but these are not available to programs and are not listed by lconfig -p. What file should the path to the libraries be added to, before running ldconfig?
Question No: 138 – (Topic 2)
Which TWO of the following statements about xinetd and inetd are correct?
xinetd supports access control by time.
xinetd only supports TCP connections.
xinetd is faster than xinetd and should be preferred for this reason.
xinetd includes support for X connections.
xinetd and inetd are used to reduce the number of listening daemons.
Question No: 139 CORRECT TEXT – (Topic 2)
In which directory are the PAM modules stored?
Question No: 140 – (Topic 2)
What is the command to add another IP address to an interface that already has (at least) one IP address?
A. ifconfig eth0:1 192.168.1.2
B. ifconfig eth0 192.168.1.2
C. ipconfig eth0:1 192.168.1.2
D. ipconfig eth0 192.168.1.2
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|