[Free] 2018(Jan) EnsurePass Passguide Juniper JN0-370 Dumps with VCE and PDF 61-70

Ensurepass.com : Ensure you pass the IT Exams
2018 Jan Juniper Official New Released JN0-370
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/JN0-370.html

QFabric, Specialist (JNCIS-QF)

Question No: 61

You have been asked to merge a newly deployed QFabric system with an existing Layer 2 network. The existing Layer 2 network is running RSTP and must retain ownership of the root bridge after the merger is complete.

Which two actions must be completed? (Choose two.)

  1. Set the root bridge priority to the highest possible value.

  2. Set the root bridge priority to the lowest possible value.

  3. Connect the QFabric system to the existing Layer 2 network using an interface belonging to the network Node group.

  4. Connect the QFabric system to the existing Layer 2 network using an interface belonging to a server Node group.

Answer: A,C

Question No: 62

Host A is connected to two Node devices in a redundant server Node group over a LAG link. Host B is connected to a Node device on a server Node group. Traffic is running between Host A and Host B.

Which statement is true?

  1. The server Node group will calculate the hash for Host A#39;s MAC address and forward traffic to one of the Node devices participating in the redundant server Node group.

  2. The server Node group will send traffic to Host A#39;s MAC address on both member links of the LAG.

  3. The network Node group will send traffic to Host A#39;s MAC address on both links of LAG.

  4. The redundant server Node group will calculate the hash for Host A#39;s MAC address and forward traffic on one of the member links of the LAG.

Answer: A

Question No: 63

– Exhibit – [edit interfaces]

user@qfabric# show LC2:xe-0/0/20 {

mtu 2100;

unit 0 {

family ethernet-switching { port-mode trunk;

vlan {

members v30-FCoE;

}

native-vlan-id 11;

}

}

}

– Exhibit –

Click the Exhibit button.

Referring to the exhibit, you have been informed that FCoE packets are not being passed through the QFabric system.

What is causing the problem?

  1. The MTU is too small.

  2. The protocol family is incorrect.

  3. The port mode is incorrect.

  4. The unit ID is incorrect.

Answer: A

Question No: 64

A customer says that no 10 GbE interfaces in a Node device are operational. What are two reasons for this happening? (Choose two.)

  1. Non-Juniper SFPs are used.

  2. One of the redundant data plane connections is down.

  3. The control plane for the Node device is down.

  4. The Node device is in the disconnected state.

Answer: A,D

Question No: 65

Which process is responsible for fabric link discovery in a QFabric system?

  1. VCCPDF

  2. RPDF

  3. VCCPD

  4. CCIF

Answer: A

Question No: 66

– Exhibit –

lt;node-namegt; Inventory name for the remote node DRE-0 Diagnostic routing engine

FC-0 Fabric control FC-1 Fabric control FM-0 Fabric manager NW-NG-0 Node group p3603-c Node Group p4186-c Node Group

p4840-c/RE0 Interconnect device control board

– Exhibit –

Click the Exhibit button.

Once the Director group is up and initially configured, you want to connect to a Node group. Referring to the exhibit, which command should you use?

  1. request component login p3603-c

  2. request chassis device-mode fabric

  3. request component login FC-1

  4. request component login p4840-c/RE0

Answer: A

Question No: 67

A user account has the remote-debug-permission parameter set but the user is unable to log in to any devices.

What is causing this problem?

  1. The user is only configured with the qfabric-user class.

  2. The user is not a root user in the QFabric system.

  3. The user is not a superuser in the QFabric system.

  4. The Node devices have not been configured with the correct users.

Answer: A

Question No: 68

You are configuring a Node group name. Which statement is correct?

  1. The maximum length of a Node group name is 8 characters.

  2. MyDCNG and mydcng refer to same the components.

  3. director-group is a valid name for a new Node group.

  4. DC-CA-ng-1 is a valid name for a new Node group.

Answer: D

Question No: 69

You are asked to attach a QFabric system to an existing Fibre Channel SAN. Which switch would enable you to accomplish this?

  1. FCoE transit switch

  2. Fibre Channel forwarder switch

  3. FCoE gateway switch

  4. Fibre Channel routing switch

Answer: C

Question No: 70

– Exhibit –

user@qfabricgt; show route

inet.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden)

= Active Route, – = Last Active, * = Both

1.1.1.1/32 *[Local/0] 3d 18:26:18

Reject

2.2.2.0/24 *[Direct/0] 3d 18:18:56

via NW-NG-0:vlan.2

2.2.2.1/32 *[Local/0] 3d 18:26:18

Local via NW-NG-0:vlan.2 3.3.3.1/32 *[Local/0] 3d 18:26:18

Reject

224.0.0.5/32 *[OSPF/10] 3d 18:26:19, metric 1

MultiRecv

user@qfabricgt; show vlans Name Tag Interfaces default

None vlan1 None vlan2

node1:xe-0/0/20.0*, node2:xe-0/0/20.0* vlan3

node0:xe-0/0/6.0

– Exhibit –

Click the Exhibit button.

Referring to the exhibit, which two statements are true for hosts on VLANs 1, 2, and 3? (Choose two.)

  1. Hosts on VLAN 2 should be able to reach hosts on VLAN 1.

  2. Hosts on VLAN 2 should be able to reach hosts on VLAN 3.

  3. Hosts on VLAN 2 cannot reach hosts on VLAN 3.

  4. Hosts on VLAN 2 cannot reach hosts on VLAN 1.

Answer: C,D

100% Ensurepass Free Download!
Download Free Demo:JN0-370 Demo PDF
100% Ensurepass Free Guaranteed!
JN0-370 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No