[Free] 2018(Jan) EnsurePass Passguide Juniper JN0-360 Dumps with VCE and PDF 21-30

Ensurepass.com : Ensure you pass the IT Exams
2018 Jan Juniper Official New Released JN0-360
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/JN0-360.html

Juniper Networks Certified Internet Specialist, – Service Provider (JNCIS-SP)

Question No: 21

Which two statements are correct about RSVP path messages? (Choose two.)

  1. They are sent by the egress router upstream.

  2. They are sent by the ingress router downstream.

  3. They are used to create an LSP.

  4. They are used to reserve resources for an LSP.

Answer: B,C

Question No: 22

– Exhibit – protocols { isis {

level 1 disable; interface ge-1/0/0.0 { level 2 disable;

}

interface ge-1/1/0.0;

interface lo0.0;

}

}

– Exhibit –

Click the Exhibit button.

Referring to the exhibit, what is the resulting behavior on interface ge-1/0/0?

  1. Level 1 is enabled.

  2. Level 1 is disabled.

  3. Level 2 is enabled.

  4. Level 1 and Level 2 are disabled.

Answer: A

Question No: 23

By default, the Junos OS advertises which address(es) in LDP forwarding equivalency class (FEC) messages?

  1. all router addresses

  2. all transit interfaces

  3. loopback address

  4. primary transit interface address

Answer: C

Question No: 24

You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You have been asked to create a static route that will use 43 18 7 1 as its primary next-hop and 76 1310 2 as its secondary next-hop.

Which command correctly configures this setup?

  1. set static route 0/0 76.13.10.2 qualified-next-hop 43.18.7.1 pref 10

  2. set static route 0/0 next-hop 43.18.7.1 secondary-next-hop 76.13.10.2 preference 10

C. set static route 0/0 next-hop [76.13.10.2 10.10.10.5] pref 10

D. set static route 0/0 next-hop 43.18.7.1 qualified-next-hop 76.13.10.2 preference 10

Answer: D

Question No: 25

You want to ensure that your RSVP LSPs are following a particular path across the network.

Which RSVP object ensures that your desire will be met?

  1. explicit route object

  2. record route object

  3. session object

  4. traffic specification object

Answer: A

Question No: 26

Router B is an OSPF router connected to both Area 0 and Area 2. Area 2 has been configured as a totally stubby area. Which three LSA types does Router B suppress from Area 2? (Choose four.)

  1. Router LSA

  2. Network LSA

  3. External LSA

  4. Summary LSA

  5. ASBR Summary LSA

Answer: A,B,C,E

Question No: 27

You have a stub OSPF area running in your network. Your supervisor has asked you to build a virtual link across this area to connect new equipment acquired in a recent ISP acquisition. Which statement is correct about this scenario?

  1. Type 5 LSAs would be blocked in a stub area.

  2. Type 5 LSAs would carry external information across your transit area to the backbone.

  3. Type 5 LSAs would be seen only in the newly attached area.

  4. Type 5 LSAs would be converted to type 7 LSAs.

Answer: A

Question No: 28

You are asked to configure an MC-LAG, in active-active mode, between PE1 and PE2. Which configuration is correct?

Ensurepass 2018 PDF and VCE

  1. Option A

  2. Option B

  3. Option C

  4. Option D

Answer: D

Question No: 29

How are BGP routes originated?

  1. BGP routes are created using policies associated with BGP peering sessions.

  2. BGP routes are created using IP subnet definitions at each defined BGP peer.

  3. BGP routes are created based on interface subnets used for peering sessions.

  4. BGP routes are created based on all interface subnets on all BGP routers.

Answer: A

Question No: 30

You are logged into a router and have navigated to the (edit routing-options] level of the hierarchy. You have been asked to create a static route that will use 10.10.10.1 as its primary next-hop and 10.10.10.5 as its secondary next-hop.

Which command correctly configures this scenario?

  1. set static route 8/8 10.10.10.1 qualified-next-hop 10.10.10.5 pref 10

  2. set static route 8/8 next-hop 10.10.10.1 secondary-next-hop 10.10.10.5 preference 10

  3. set static route 8/8 next-hop 10.10.10.1 qualified-next-hop 10.10.10.5 preference 10

D. set static route 8/8 next-hop [10.10.10.1 10.10.10.5] pref 10

Answer: C

100% Ensurepass Free Download!
Download Free Demo:JN0-360 Demo PDF
100% Ensurepass Free Guaranteed!
JN0-360 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No