[Free] 2018(Jan) EnsurePass Examcollection IBM C9010-262 Dumps with VCE and PDF 61-70

Ensurepass.com : Ensure you pass the IT Exams
2018 Jan IBM Official New Released C9010-262
100% Free Download! 100% Pass Guaranteed!

IBM Power Systems with POWER8 Enterprise Technical Sales Skills V2

Question No: 61 – (Topic 2)

How is the 19 inch PCIe Gen3 I/O Expansion Drawer connected on POWER8 systems?

  1. PCIe Gen3 InfiniBand Adapter

  2. GX Bus

  3. Optical CXP Converter Adapter

  4. PCIe x8 SR-IOV Adapter

Answer: C Explanation:

PCIe3 x16 adapter provides two optical CXP ports for the attachment of two active optical cables (AOC). One adapter supports the attachment of one PCIe3 module in a PCIe Gen3 I/O Expansion Drawer.

References: https://www- 01.ibm.com/common/ssi/printableversion.wss?docURL=/common/ssi/rep_sm/5/877/ENUS 9119-_h05/index.html

Question No: 62 – (Topic 2)

A customer would like to freely move processor and memory activations from one Power E870 system to another Power E870 system.

What is required to implement this capability?

  1. PowerVM Enterprise Edition

  2. Live Partition Mobility

  3. Power Enterprise Pools

  4. Dynamic Resource Optimizer

Answer: C Explanation:

With Power Enterprise Pools, IBM continues to enhance the ability to freely move processor and memory activations from one system to another system in the same pool, without the need for IBM involvement.

References: https://www- 01.ibm.com/common/ssi/ShowDoc.wss?docURL=/common/ssi/rep_sm/6/872/ENUS9119-


Question No: 63 – (Topic 2)

A customer with critical up-time requirements is comparing POWER8 Enterprise with POWER8 Scale-Out servers.

Which of the following RAS features are found only on all of the POWER8 Enterprise servers?

  1. Redundant clocksHot Swap FansRedundant Fans

  2. Split backplaneTwo batteries for clockDual operator console

  3. Active Memory MirroringTriply redundant thermal sensorsRedundant voltage regulators

  4. Hot plug PCIe adaptersHot swap disksMemory buffer retry

Answer: A Explanation:

References: http://www-01.ibm.com/common/ssi/cgi- bin/ssialias?subtype=WHamp;infotype=SAamp;appname=STGE_PO_PO_USENamp;htmlfid=POW0 3133USEN

Question No: 64 – (Topic 2)

What is an advantage of running Linux on Power compared to x86 technology?

  1. Docker containers

  2. Chipkill memory

  3. Extended Error Handling

  4. Partition mobility

Answer: D Explanation:

Live Partition Mobility, a component of the PowerVM Enterprise Edition hardware feature, provides the ability to move AIX, IBM i, and Linux logical partitions from one system to another. The mobility process transfers the system environment that include the processor state, memory, attached virtual devices, and connected users.

References: https://www.ibm.com/support/knowledgecenter/POWER7/p7hc3/iphc3kickoff.htm

Question No: 65 – (Topic 2)

A customer is comparing a Power Systems solution with an x86 solution for big data analytics.

Which no-change IBM analysis is available to justify the value of IBM Power Servers compared to x86 solutions?

  1. System Planning Tool

  2. Workload Estimator

  3. Eagle Study

  4. Performance Navigator

Answer: B Explanation:

Power Systems confidently delivers consistently high service levels across hundreds of virtual workloads on a single system.

Note: The IBM Systems Workload Estimator is a web-based sizing tool for IBM Power Systems, System i, System p, System x, IBM Flex Systems, and IBM PureFlex Systems. You can use this tool to size a new system, to size an upgrade to an existing system, or to size a consolidation of several systems.

The Workload Estimator (WLE) allows measurement input to best reflect your current workload and provides a variety of built-in workloads to reflect your emerging application requirements. Virtualization can be used to yield a more robust solution. The Workload Estimator will provide current and growth recommendations for processor, memory, and disk that satisfy the overall client performance requirements.

References: http://m.ibm.com/http/www-947.ibm.com/systems/support/tools/estimator/

Question No: 66 – (Topic 2)

A stockbroker runs their high speed trading application on a standalone Linux system.

They would like to consolidate the trading workload onto an existing VIOS managed Power E870. A single 10Gb Ethernet adapter is used for all the existing partitions.

Which of the following satisfies the customer requirement for minimum network latency for the trading workload?

  1. Implement a partition that uses dedicated SSD drives and VIOS shared Ethernet to the existing 10Gb Ethernet.

  2. Allocate a new dedicated Ethernet adapter to the trading partition.

  3. Implement the new partition and use the existing shared Ethernet connection for the trading link.

  4. Implement a partition that uses dedicated memory with existing storage and VIOS shared Ethernet to the existing 10Gb Ethernet.

Answer: B Explanation:

Ensurepass 2018 PDF and VCE

To minimize network latency use a dedicated Ethernet adapter. Note: Architectural view of the VIOS

References: IBM Power Systems E870 and E880, Technical Overview and Introduction (December 2014), page 134 http://www.redbooks.ibm.com/redpapers/pdfs/redp5137.pdf

Question No: 67 – (Topic 2)

A Power 770 MMD with two CEC enclosures 256GB of memory, and PCIe expansion drawers with SAS disk is being upgraded to a Power E870.

Which of the following is a valid process to leverage the existing client investment and maintain the existing serial number?

  1. Remove expansion drawers.Perform an MES upgrade of the memory and processor to POWER8.Migrate disk to the E870 system nodes.

  2. Remove expansion drawers.Add EXP24S.Perform an MES upgrade of the memory and processor to POWER8.

  3. Migrate expansion drawers.Perform an MES upgrade of the memory and processor to POWER8.

  4. Migrate expansion drawers.Migrate disk.Perform an MES upgrade of the memory and processor to POWER8.

Answer: D Explanation:

The following features that are present on the current system can be moved to the new system if they are supported in the Power E870 and E880:

Disks (within an EXP24S I/O drawer) SSDs (within an EXP24S I/O drawer)

PCIe adapters with cables, line cords, keyboards, and displays Racks


EXP24S I/O drawers

For POWER7 processor-based systems that have the Elastic CoD function enabled, you must reorder the elastic CoD enablement features when placing the upgrade MES order for the new Power E870 or E880 system to keep the elastic CoD function active. To initiate the model upgrade, the on/off enablement features should be removed from the configuration file

before the MES order is started. Any temporary use of processors or memory owed to IBM on the existing system must be paid before installing the Power E870 or E880.

References: IBM Power Systems E870 and E880 Technical Overview and Introduction, page 28


Question No: 68 – (Topic 2)

A customer has a 40-core E880 with 2TB of memory installed with 10 cores and 1TB of memory activated. They want to move a Linux application from their x86 environment to the E880. The application is supported on Linux on Power and requires 8 cores and 64GB of memory.

The Linux team is unfamiliar with the Power hardware.

Which of the following should be proposed to add the additional resources at the lowest cost?

  1. Purchase 2 IFLs and add them to the default processor pool.

  2. Purchase an additional 8 cores and 64GB of memory.

  3. Purchase 2 IFLs and 64GB of memory activations.

  4. Purchase 2 IFLs and isolate them in a shared processor pool.

Answer: D Explanation:

Power Integrated Facility for Linux (Power IFL) is an optional lower cost per processor core activation for Linux-only workloads on IBM Power Systems. You can activate Power IFL processor cores that are restricted to running Linux workloads.

You can use shared processor pools to limit the use of processor capacity.

References: Power Systems, Power Integrated Facility for Linux (Power IFL), page 5 https://www.ibm.com/support/knowledgecenter/POWERLINUX/p7ecu/p8ega.pdf

Question No: 69 – (Topic 2)

Which of the following RAS features is always enabled and functional on an E870 / E880, regardless of configuration?

  1. System auto-restart

  2. Dynamic Processor Sparing

  3. Dynamic Memory Sparing

  4. Processor Instruction Retry

Answer: D Explanation:

Processor Instruction Retry allows the system to recover from soft faults that otherwise result in outages of applications or the entire server.

Note: Within the processor core, soft error events might occur that interfere with the various computation units. When such an event can be detected before a failing instruction is completed, the processor hardware might be able to try the operation again by using the advanced RAS feature that is known as Processor Instruction Retry.


Question No: 70 – (Topic 2)

To improve response times for an OLAP application, a customer requires a SAN-attached storage solution with microsecond latency and highest density per rack.

Which of the following supports these requirements?

  1. Storwize V3700

  2. Storwize V7000

  3. EXP30

  4. FlashSystem 900

Answer: D Explanation:

IBM FlashSystem 900 is designed to provide scalable performance for the most demanding enterprise class applications, including virtualized or bare-metal OLTP and OLAP databases, virtual desktop infrastructures, technical computing applications, and cloud environments.

References: http://www.redbooks.ibm.com/abstracts/tips1261.html?Open

100% Ensurepass Free Download!
Download Free Demo:C9010-262 Demo PDF
100% Ensurepass Free Guaranteed!
C9010-262 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No