[Free] 2018(Jan) Dumps4cert Passguide CompTIA FC0-U41 Dumps with VCE and PDF 141-150
CompTIA Strata IT Fundamentals
Question No: 141 – (Topic 2)
Which of the following is a block of data stored on a client computer by a web browser?
Answer: A Explanation:
A cookie is a block of data stored on a client computer by a Web server. If no expiration date is set for a cookie, the cookie expires when the browser is closed. If the expiration date is set for afuture date, the cookie is stored on the client#39;s disk after the session ends, and if set for a past date, the cookie is deleted.
Answer option D is incorrect. Keyword is an important term used to search Web pages on a particular topic. For example, if auser enters a keyword Networking in a search engine
form, all Web pages containing the term Networking will be displayed. Answer options B and C are incorrect. Plug-in is also known as add-in.
A plug-in is a computer program that is used with host applications such as Web browsers, e-mail clients, etc. It is created to provide certain specific functions. Plug-ins is separate from a host application. However, they are dependent on the services provided by the host application and do not usually work by themselves.
Question No: 142 – (Topic 2)
How many IEEE 1394 devices can be connected to a single IEEE 1394 port through daisy- chaining?
63 C. 127 D. 110
Answer: B Explanation:
Up to 63 IEEE 1394 devices can be connectedto a single IEEE 1394 port through daisy- chaining.
Institute of Electrical and Electronics Engineers (IEEE) 1394 is a standard for high-speed serial bus that provides enhanced PC connectivity for a wide range of devices. These devices include consumer audiovisual components, traditional PC storage devices, and handheld devices. IEEE
1394 is also known as Firewire.
The FireWire connector is used with the FireWire serial bus. FireWire can transmit data at a very high speed of 400Mbps and 800Mbps. Two types ofconnectors are available in this category, namely 4-pin and 6-pin.
Question No: 143 – (Topic 2)
Which of the following devices are known as Input/Output devices? Each correct answer represents a complete solution. Choose two.
Network interface card
Floppy disk drive
Answer: B,E Explanation:
The devices that perform both input and output functions are known as Input/Output devices.
Floppy disk drives and network interface cards areInput/Output devices. The other I/O devices are hard disk drives and modems.
FactWhat is a network interface card (NIC)? Hide
A network interface card (NIC) is a computer circuit board or card installed in a computer. It provides physical connection between a computer and the network. Network interface cards provide a dedicated, full-time connection to a network.
Answer options D and C are incorrect. Scanners and keyboards are input devices. Answer option A is incorrect. A printer is an output device.
Question No: 144 – (Topic 2)
You work as a technician for Troubleshooters Inc.Rick, a user, calls you to state that his computer#39;s startup process is taking more than usual time. His computer is configured for dual booting in Windows 98 and Windows XP. He also complains that default booting occurs so soon that he does not get enoughtime to choose the operating system. He wants to optimize the startup time as well as increase the display time of the list of operating systems. Which of the following steps will you take to accomplish the task?
Run the MSINFO32 command and configurethe settings.
Run the CHKDSK command and configure the settings.
Run the SFC /SCANNOW command and configure the settings.
Run the MSCONFIG command and configure the settings.
Answer: D Explanation:
MSCONFIG is a command-line tool that opens the System Configuration Utility dialog box, which can be used to troubleshoot and resolve startup errors, resolve unwanted prompts by third party users, find and resolve problems with running services, and resolve the errors regarding boot paths configured on multi-boot computers. MSCONFIG.EXE helps a user to detect a specific file that is causing startup problems.
Answer option A is incorrect. The MSINFO32 command cannot be used to edit configuration.
What is the MSINFO32 utility? Hide
MSINFO32 is a command-line tool that opens the System Information window, which provides the detailed information about the configuration of a computer. A user can use this utility when he wants to obtain information about the local or remote computer#39;s hardware configuration, installed software, computer components, hardware conflicts, drivers, memory status, and product activation status.
Question No: 145 – (Topic 2)
Which of the following modes saves maximum battery power while maintaining the current state of a computing session?
Answer: A Explanation:
Hibernate mode saves maximum battery power while maintaining the current state of a computing session.
What is hibernate mode? Hide
Hibernate mode is a power savingfeature for computers. In hibernate mode, the current state of a computer is saved to the hard disk, and the computer shuts down. A user will have to power on the computer to restore the previous settings.
When a computer resumes from hibernate mode, it reads the saved settings from the disk and restores the system state as it was before it entered hibernate mode. By default, hibernate mode is disabled. If a computer is not ACPI-enabled or
APM-enabled, users will have to enter hibernate mode manually. Userscannot set the computer to automatically hibernate after a certain time. With ACPI-enabled and APM- enabled computers, users are able to set hibernate mode automatically.
Answer option B is incorrect. The standby mode is a power saving feature for computers. In this mode, a computer does not shut down completely. The computer goes to low power state and, as a result, it consumes less power. When the computer resumes from the standby mode, full power is restored to its devices. During the standby mode, if the power supply is disconnected or interrupted, data might be lost.
The standby mode is available automatically on ACPI-enabled or APM-enabled computers. Users do not need to enable this mode manually.
This mode is not available in non-ACPI and non-APM based computers.
Answer option D is incorrect. Safe mode is not a power saving mode. What is Safe Mode? Hide
Safe Mode is a Windows feature used to start a computer with basic drivers, such as mouse, keyboard, etc. It bypasses blocking issues, such as system corruption, or installation of incompatible drivers or system services, enabling the Administrator to resolve such issues.
Answer option C is incorrect. There is no such power saving mode as Session. Reference: TechNet, Contents: quot;Chapter 20 – Power Managementquot;
Question No: 146 – (Topic 2)
Which of the following term is used for software designed and optimized for controlling what content is permitted to a reader, especially when it is used to restrict material delivered over the Web?
Answer: A Explanation:
Content-control software term is used for software designed and optimized for controlling what content is permitted to a reader,especially when it is used to restrict material delivered over the Web.
Answer option D is incorrect. Spyware is a program that takes partial control over a user#39;s computer without user#39;s permission. Spyware programs can collect various types of personal information, such as Internet surfing habits, and Web sites that the user has visited. Spyware programs can also interfere with the control of a user#39;s computer, such as installing additional software, redirecting Web browser activities, accessing Web sitesblindly, etc.
Answer option C is incorrect. The term malware refers to malicious software, which is a broad class of malicious viruses, including spyware.
Malware is designed to infiltrate or damage a computer without the consent of the owner. Answer option B is incorrect. ActiveX controls are software components that can be integrated into
Web pages and applications, within a computer or among computers in a network, to reuse the functionality.
Question No: 147 – (Topic 2)
Which of the following interfaces provides the fastest data transfer rate for printing a document on a printer?
Answer: A Explanation:
Firewire 800 is the fastest data transfer interface for printing a document on a printer. It is the second-generation interface that transfers data at the rate of 800 Mbps. The original FireWire specification, FireWire 400, runs at 400 Mbps.
Answer option D is incorrect. USB 2.0 has a maximum data transfer rate of 480 Mbps. Answer option C is incorrect. The IEEE 802.11a interface has a maximum bandwidth of 54 Mbps.
Answer option B is incorrect. The IEEE 802.11b interface has a maximum bandwidth of 11 Mbps.
Question No: 148 – (Topic 2)
You are using infrared devices in your network. You want to improve the quality of connections and achievebetter communication between infrared devices. What will you do to achieve this? Each correct answer represents a complete solution. Choose three.
Move the devices closer together.
Keep the devices in line of sight.
Remove any obstruction betweenthe devices.
Keep the devices in different geographic locations.
Answer: A,B,C Explanation:
To improve the quality of your connections, keep the devices in line of sight so that they point directly at each other. Also, move the devices closertogether and remove any obstruction between the devices so that the signal transmitted by the devices can reach to
the other devices.
You can also verify that no other devices are interfering with the connection, because some household devices, like TV remotes, emit infrared signal that can interfere with your connection.
Reference: TechNet Technical Information CD, How to Troubleshoot Issues with Infrared
Question No: 149 – (Topic 2)
Which of the following switches of the XCOPY command continues to copy files even if errors occur?
Answer: C Explanation:
The /c switch of the XCOPY command continues to copy files even if errors occur. Answer option A is incorrect. The /q switch of the XCOPY command does not display filenames while copying.
Answer option B is incorrect. The /e switch of the XCOPY command is used to copy directories and subdirectories, including empty directories.
Answer option D is incorrect. The /r switch of the XCOPY command overwrites Read-only fileswhile copying.
Question No: 150 – (Topic 2)
Which of the following switches of the ATTRIB command clears the attributes of a file?
Answer: A Explanation:
The ATTRIB commanduses the – switch to clear the attributes of a file. For example, in order to clear the Hidden attribute of a file, a user will have to type the following command on the command prompt:
ATTRIB -H lt;filenamegt;
Where H is used for the Hidden attribute.
Answeroption C is incorrect. The ATTRIB command uses the switch to set the attributes of a file.
Answer option D is incorrect. The ATTRIB command uses the R switch for the Read-only attribute.
Answer option B is incorrect. The ATTRIB command uses the A switchfor the Archive attribute.
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|