[Free] 2018(Aug) Ensurepass Microsoft 70-743 Dumps with VCE and PDF 41-50
Upgrading Your Skills to MCSA: Windows Server 2016
Question No: 41
You have a server that runs Windows Server 2016.
The server contains a storage pool named Pool1. Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4, and Disk5.
A virtual disk named VirtualDisk1 is stored in Pool1. VirtualDisk1 uses the parity storage layout.
You need to remove Disk3 from Pool1.
Which two commands should you run? Each correct answer presents part of the solution.
Update-StoragePool -FriendlyName Pool1
Set-ResiliencySetting -StoragePool Pool1 -PhysicalDiskRedundancyDefault 4
Reset-PhysicalDisk -FriendlyName Disk3
Remove-PhysicalDisk -FriendlyName Disk3
Set-PhysicalDisk -FriendlyName Disk3 -Usage Retired
Question No: 42
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 are connected to the same network.
On Server1 and Server2, you create an external network switch named Switch1. You have the virtual machines shown in the following table.
All three virtual machines are connected to Switch1.
You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.
What should you do?
On Server2, configure the VLAN ID setting of Switch1.
On Server2, create an external switch and connect VM3 to the switch.
Modify the subnet mask of VM1 and VM2.
Configure network virtualization for VM1 and VM2.
Question No: 43 HOTSPOT
Your network contains an Active Directory forest. The forest contains two domain controllers named DC1 and DC2 that run Windows Server 2016. DC1 holds all of the operations master roles.
DC1 experiences a hardware failure.
You plan to use an automated process that will create 1,000 user accounts. You need to ensure that the automated process can complete successfully.
Which command should you run? To answer, select the appropriate options in the answer area.
Box 1: Move-ADDirectoryServerOperationMasterRole
Box 2: RIDMaster
Box 3: -Force
Question No: 44 DRAG DROP
You have a server that runs Windows Server 2016. You install three additional disks named Disk1, Disk2, and Disk3. You plan to use these physical disks to store data.
You need to create a volume to store data. The solution must prevent data loss in the event of a single disk failure.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Step 1: Create a Storage Pool
First we create a Storage Pool. We specify which disks should be included in the storage pool.
Step 2: Create a Virtual Disk
After creating the storage pool now start creating a virtual disk for the pool you had created.
Step 3: Create a Volume
After creating the virtual disk, create a volume with the NewVolume Wizard. You create the volume on the Virtual Disk you created in Step 2.
Question No: 45 HOTSPOT
You have a virtual machine named VM1 that runs Windows Server 2016. VM1 is a Remote Desktop Services (RDS) server.
You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network.
Which command should you run on the Hyper-V host? To answer, select the appropriate
options in the answer area.
Question No: 46 HOTSPOT
Your network contains an Active Directory forest named contoso.com.
Your company has a custom application named ERP1. ERP1 uses an Active Directory Lightweight Directory Services (AD LDS) server named Server1 to authenticate users.
You have a member server named Server2 that runs Windows Server 2016. You install the Active Directory Federation Services (AD FS) server role on Server2 and create an AD FS farm.
You need to configure AD FS to authenticate users from the AD LDS server.
Which cmdlets should you run? To answer, select the appropriate options in the answer area.
To configure your AD FSfarm to authenticate users from an LDAP directory, you can complete the following steps:
Step 1: New-AdfsLdapServerConnection
First, configure a connection to your LDAP directory using the New- AdfsLdapServerConnection cmdlet:
$DirectoryCred = Get-Credential
$vendorDirectory = New-AdfsLdapServerConnection -HostName dirserver -Port 50000-SslMode None -AuthenticationMethod Basic -Credential $DirectoryCred
Step 2 (optional):
Next, you can perform the optional step of mapping LDAP attributes to the existing AD FS claims using the New-AdfsLdapAttributeToClaimMapping cmdlet.
Step 3: Add-AdfsLocalClaimsProviderTrust
Finally, you must register the LDAP store with AD FS as a local claims provider trust using the Add-AdfsLocalClaimsProviderTrust cmdlet:
Add-AdfsLocalClaimsProviderTrust -Name “Vendors” -Identifier “urn:vendors” -Type L References: https://technet.microsoft.com/en-us/library/dn823754(v=ws.11).aspx
Question No: 47 HOTSPOT
You have an Active Directory domain named Contoso.com. The domain contains Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The Hyper-V hosts are configured to use NVGRE for network virtualization.
You have six virtual machines that are connected to an external switch. The virtual machines are configured as shown.
To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate options in the answer area.
The GRE keys must match.
To separate the traffic between the two virtualized networks, the GRE headers on the tunneled packets include a GRE Key that provides a unique Virtual Subnet ID for each virtualized network.
Question No: 48 HOTSPOT
You have a server named Server1 that runs Windows Server 2016 and has a Hyper-V server role installed.
You open Disk Management on Server1 as shown in the following graphic.
You plan to configure Disk 13 as a pass-through disk for a generation 1 virtual machine.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
Question No: 49 DRAG DROP
You have a Hyper-V host named Server1 that runs Windows Server 2016.
The installation source files for Windows Server 2016 are located in D:\Source. You need to create a Nano Server image.
Which cmdlets should you run? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bat between panes or scroll to view content.
Step 1: Import Module
Import-Module .\NanoServerImageGenerator.psm1 Step 2: New New-NanoServerImage
Create Nano Server Image VHDX
New-NanoServerImage -MediaPath .\Files -BasePath.\Base -TargetPath
References: https://technet.microsoft.com/en-us/windows-server-docs/get-started/deploy- nano-server
Question No: 50
You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.
You need to ensure that the traffic is distributed evenly among the virtual machines that host App1.
What should you include in the environment?
Network Controller and Windows Server Software Load Balancing (SLB) nodes
an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes
an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
Network Controller and Windows Server Network Load Balancing (NLB) nodes
Answer: A Explanation:
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|