2013 Latest MCTS 70-642 Exam Questions 291-295

Ensurepass

QUESTION 11
Your network contains a server named DC1 that has the DHCP Server server role installed.
You discover the following warning message in the Event log on DC1: “There were orphaned entries deleted in the configuration due to the deletion of a class and option definition. Please recheck the server configuration.”
You need to resolve the warning message. What should you do?
A. Reconcile the scope.
B. Configure Open Shortest Path First (OSPF) on the router. C. Restore the database from a backup.
D. Configure DHCP link layer-based filtering. E. Compact the database.
F. Authorize DC1 in Active Directory.
G. Configure Routing Information Protocol version 2 (RIPv2) on the router
H. Increase the database cleanup interval. I. Configure a DHCP Relay Agent.
J. Modify the start address.
K. Configure name protection.
Correct Answer: A
Explanation/Reference:
Correct answer(s): A
Resolve
Reconcile the DHCP scope
In the DHCP snap-in, reconcile the DHCP scope.
To perform these procedures, you must be a member of the Administrators group, or you must have been delegated the appropriate authority.
To reconcile a DHCP scope:
At the DHCP server, click Start, point to Administrative Tools, and then click DHCP. In the console tree, click the scope you want to configure.
On the Action menu, click Reconcile.
In the Reconcile dialog box, click Verify.
If the verification indicates that the scope is consistent, click OK.
If the scope is not consistent, select the displayed IP addresses that need to be reconciled, and then click
Reconcile to repair inconsistencies.
Ensure that there are no discrepancies in the options, classes, or other information configured for each scope.
Verify
To perform these procedures, you must be a member of the Administrators group, or you must have been delegated the appropriate authority.
To verify that DHCP scopes are configured properly and reconciled, confirm that the DHCP snap-in displays the green up arrow icon for Scope:
At the DHCP server, click Start, point to Administrative Tools, and then click DHCP.
In the console tree, click the scope you want to verify. The green up arrow icon should be displayed. On the Action menu, click Reconcile.
In the Reconcile dialog box, click Verify.
If the verification indicates that the scope is consistent, click OK.
http://technet.microsoft.com/en-us/library/cc726942(v=ws.10).aspx

QUESTION 12
Your network contains an Active Directory domain. The domain contains four client computers. The client computers are configured as shown in the following table.
Your company plans to implement DirectAccess.
You need to identify which client computers can use DirectAccess.
Which client computers should you identify? (Each correct answer presents part of the solution. Choose two.)
A. Computer2
B. Computer3
C. Computer4
D. Computer1
Correct Answer: BC
Explanation/Reference:
Correct answer(s): B, C
DirectAccess requires the following:
-One or more DirectAccess servers running Windows Server 2008 R2 (with or without UAG) with two network adapters: one that is connected directly to the Internet and one that is connected to the intranet. DirectAccess servers must be a member of an AD DS domain.
-On the DirectAccess server, at least two consecutive, public IPv4 addresses assigned to the network adapter that is connected to the Internet.
-DirectAccess client computers that are running Windows 7 Enterprise or Windows 7 Ultimate. DirectAccess clients must be members of an AD DS domain.
-At least one domain controller and DNS server that is running Windows Server 2008 SP2 or Windows Server 2008 R2. When UAG is used, DirectAccess can be deployed with DNS servers and domain controllers that are running Windows Server 2003 when NAT64 functionality is enabled.
-A public key infrastructure (PKI) to issue computer certificates, and optionally, smart card certificates for smart card authentication and health certificates for NAP. For more information, see Public Key Infrastructure on the Microsoft Web site.
-Without UAG, an optional NAT64 device to provide access to IPv4-only resources for DirectAccess clients. DirectAccess with UAG provides a built-in NAT64.
http://technet.microsoft.com/en-us/library/dd637797(v=ws.10).aspx

QUESTION 13
Your network contains a server that has the Network Policy Server (NPS) role service installed.
You need to configure a network policy that will apply to wireless clients only. Which condition should you configure?
A. NAS port Type
B. Service Type
C. MS-Service Class D. Framed Protocol E. NAS Identifier
Correct Answer: A
Explanation/Reference:
Correct answer(s): A

QUESTION 14
Your printing infrastructure is configured as shown in the following table.
You need to ensure that print jobs submitted by the members of Group1 print before queued print jobs submitted by the members of Group2.
What should you do?
A. Modify the permissions assigned to Group2_Print. B. Change the priority of Group2_Print to 10.
C. Change the priority of Group1_Print to 10.
D. Configure Group1_Print to begin printing immediately.
E. Configure Group2_Print to begin printing after the last page is spooled.
Correct Answer: B
Explanation/Reference:
Correct answer(s): B
Question incomplete but looks like there’s two or more printers!
Printer Priority
Printer priority determines the likelihood that a printer is chosen relative to other printers.
When adding printers, think of physical printers as the actual printers that print documents and virtual printers as representations of physical printers. You send a document to a virtual printer on the network and that print job is printed on paper by a physical printer.
Printer priority only has an effect when it is set differently for different virtual printers that correspond to the same physical printer. Setting different printer priorities for different virtual printers that correspond to different physical printers has no effect.
A few facts about printer priority:
Higher numbers correspond to higher priorities, so priority 1 printers are of the lowest priority.
Printer priority has no effect on job priority, so multiple jobs sent to the same virtual printer are affected by their job priority, but not by the printers priority. Job priority can be set by viewing the properties of a job in a print queue, whereas print priority is set using the Priority field on the Advanced tab of a printers property page.
Printer priority is only evaluated when determining which job to complete next. A printer does not stop processing a job it is already working on, even when the spooler receives a higher priority job, directed to a
higher priority printer on the same port. http://technet.microsoft.com/en-us/library/cc958163.aspx

QUESTION 15
Your company has five office buildings in the same city. Each building has its own IP subnet. There are shared printers in each building. Active Directory sites and Active Directory subnets exist for each office.
Each user has a laptop that runs Windows 7. The users frequently travel between the office buildings.
You plan to publish all of the shared printers in Active Directory and to specify the Location attribute of each shared printer.
You need to ensure that the users can browse for shared printers based on the location of the printer. The solution must ensure that when the users attempt to add printers by using the Add Printer wizard, the users’ current location is used automatically.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. From the properties of each subnet object, set a value for the Location attribute.
B. From a Group Policy object (GPO), enable the Allow pruning of published printers setting.
C. From the properties of each print server computer account, set a value for the Location attribute. D. From a Group Policy object (GPO), enable the Pre-populate printer search location text sitting.
E. From the properties of each Windows 7 computer account, set a value for the Location attribute.
Correct Answer: AD
Explanation/Reference:
Correct answer(s): A, D

Download Ensurepass Latest 2013 MCTS 70-642 Real Exam Questions , help you to pass exam 100%.