2013 Latest MCTS 70-642 Exam Questions 286-290

Ensurepass

QUESTION 5
Your network contains a server named Server1 that has the Routing and Remote Access service (RRAS)
role service installed.
Server1 provides access to the internal network by using Point-to-Point Tunneling Protocol (PPTP). Static RRAS filters on the external interface of Server1 allow only PPTP. The IP address of the external interface is 131.107.1.100.
You install the Web Server (IIS) role on Server1.
You need to ensure that users on the Internet can access a Web site on Server1 by using HTTP. The solution must minimize the number of open ports on Server1.
Which two static RRAS filters should you configure on Server1? (Each correct answer presents part of the solution. Choose two.)
A. An outbound filter that has the following configurations: Source network: 131.107.1.100/32
Destination network: Any Protocol: TCP (established) Port: 80
B. An outbound filter that has the following configurations: Source network: 131.107.1.100/32
Destination network: Any
Port: 80
C. An outbound filter that has the following configurations: Source network: 131.107.1.100/32
Destination network: Any
Protocol: TCP Port: Any
D. An inbound filter that has the following configurations: Source network: Any
Destination network: 131.107.1.100/32
Protocol: TCP Port: 80
E. An inbound filter that has the following configurations: Source network: 131.107.1.100/32
Destination network: Any
Protocol: TCP Port: Any
Correct Answer: AD
Explanation/Reference:
Correct answer(s): A, D

QUESTION 6
Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2.
Network Access Protection (NAP) is deployed on Server1. Server2 has the Routing and Remote Access service (RRAS) role service installed.
You need to configure Server2 to use NAP VPN enforcement. Which authentication method should you enable on Server2?
A. Microsoft encrypted authentication version 2 (MS-CHAP v2) B. Extensible authentication protocol (EAP)
C. Allow machine certificate authentication for IKEv2
D. Encrypted authentication (CHAP)
Correct Answer: B
Explanation/Reference:
Correct answer(s): B

QUESTION 7
Your network contains a server that runs a Server Core installation of Windows Server 2008 R2.
You need to log the CPU utilization of the server. Which tool should you use?
A. relog.exe
B. oclist.exe
C. logman.exe
D. sc.exe
Correct Answer: C
Explanation/Reference:
Correct answer(s): C
Logman creates and manages Event Trace Session and Performance logs and supports many functions of
Performance Monitor from the command line
Syntax
logman [create query start stop delete update import export /?] [options]
http://technet.microsoft.com/en-us/library/cc753820(v=ws.10).aspx

QUESTION 8
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that has the Print and Document Services server role installed.
Server1 contains 200 shared printers.
Currently, none of the shared printers are listed in Active Directory.
You need to ensure that all of the shared printers on Server1 can be located by searching Active Directory. Which tool should you use? (Each correct answer presents a complete solution. Choose two)
A. Setprinter.exe
B. Printui.exe
C. Prnmngr.vbs
D. Print management
E. Pubprn.vbs
Correct Answer: DE
Explanation/Reference:
Correct answer(s): D, E
Print Management provides a single interface that administrators can use to efficiently administer multiple printers and print servers
http://technet.microsoft.com/en-us/library/cc753109(v=ws.10).aspx#BKMK_3
Pubprn.vbs – Publishes a printer to the Active Directory Domain Services. http://technet.microsoft.com/en-us/library/cc753116(v=ws.10).aspx

QUESTION 9
Your network contains two Active Directory sites named Site1 and Site2. Site1 contains a domain controller named DC1 and a file server named Server1. Site2 contains a file server named Server2.
You have a Distributed File System (DFS) namespace named \contoso.comroot that has a namespace server named DC1.
On Server1 and Server2, you create a shared folder named Marketing. You need to configure DFS to meet the following requirements:
– Ensure that clients connect to the Marketing share in their local site.
– Ensure that the files in Marketing are replicated between Server1 and Server2.
– Ensure that clients can connect to Marketing by using the URL contoso.comrootmarketing.
What should you do? (Each correct answer presents part of the solution. Choose three)
A. Install the DFS Replication role service on Server1 and Server2
B. Configure the properties of the contoso.com namespace. C. Install the DFS Replication role service on DC1.
D. Add a folder to the namespace and specify the folder targets. E. Run the New Replication Group wizard.
Correct Answer: ADE
Explanation/Reference:
Correct answer(s): A, D, E

QUESTION 10
Your network contains a server named DC1 that has the DHCP Server role installed.
You need to prevent devices that are neither company-owned nor company-managed from being assigned
DHCP addresses.
What should you enable on the DHCP server? A. Configure name protection
B. Modify the start address
C. Configure DHCP link layer-based filtering
D. Configure Open Shortest Path First (OSPF) on the router
E. Reconcile the scope.
F. Configure Routing Information Protocol version 2 (RIPv2) on the router
G. Authorize DC1 in Active Directory
H. Increase the database cleanup interval
I. Compact the database
J. Restore the database from a backup
K. Configure a DHCP Relay Agent
Correct Answer: C
Explanation/Reference:
Correct answer(s): C
Link layer filtering provides network access control for the issuance or denial of DHCP leases of IP addresses based on a media access control (MAC) address. Link layer filtering can be configured at the IPv4 node for all clients across all IPv4 scopes. This feature is currently available only for IPv4 networks.
To enable MAC address filtering
Open the DHCP Microsoft Management Console (MMC) snap-in.
In the console tree, double-click the DHCP server you want to configure, right-click IPv4, and then click
Properties.
Click Filters, and then select the Enable Allow List or the Enable Deny List check box. To configure a new filter
Open the DHCP snap-in.
In the console tree, double-click the applicable DHCP server, double-click IPv4, double-click Filters, and then right-click Allow or Deny.
Click New Filter, and then type a MAC Address and Description. Description is an optional field. http://technet.microsoft.com/en-us/library/dd759259.aspx

Download Ensurepass Latest 2013 MCTS 70-642 Real Exam Questions , help you to pass exam 100%.