2013 Latest MCSA 70-417 Exam Questions 26-30

Ensurepass

QUESTION 26
Your network contains two servers named Server1 and Server2 that run Windows Server 2012. Both servers have the Hyper-V server role installed.
Server1 and Server2 are located in different offices. The offices connect to each other by using a high- latency WAN link.
Server2 hosts a virtual machine named VM1.
You need to ensure that you can start VM1 on Server1 if Server2 fails. The solution must minimize hardware costs. What should you do?
A. On Server2, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1. B. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enable replication
for VM1.
C. On Server1, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1. D. From the Hyper-V Settings of Server2, modify the Replication Configuration settings. Enable replication
for VM1.
Correct Answer: B Section: Hyper-V Explanation
Explanation/Reference:
You have to enable replication on the Replica server–Server1–by going to the server and modifying the
“Replication Configuration” settings under Hyper-V settings.
NB :
You then go to VM1–which presides on Server2–and run the “Enable Replication” wizard on VM1.

QUESTION 27
Your network contains an Active Directory domain named fabrikam.com.
You implement DirectAccess and an IKEv2 VPN. You need to view the properties of the VPN connection. Which connection properties should you view?
To answer, select the appropriate connection properties in the answer area.
Hot Area:
Correct Answer:
Section: Network (DNS, DHCP, NIC teaming, IPAM, VPN, NAP, DirectAccess…) Explanation
Explanation/Reference:
The first Workplace Connection is the DirectAccess connection; the second is the VPN. You can tell by the icons.

QUESTION 28
You have a server named File1 that runs Windows Server 2012. File1 has the File Server role service installed.
You plan to back up all shared folders by using Microsoft Online Backup.
You download and install the Microsoft Online Backup Service Agent on File1.
You need to ensure that you use Windows Server Backup to back up data to Microsoft Online Backup. What should you do?
A. From Computer Management, add the File1 computer account to the Backup Operators group.
B. From the Services console, modify the Log On settings of the Microsoft Online Backup Service Agent. C. From Windows Server Backup, run the Register Server Wizard.
D. From a command prompt, run wbadmin.exe enable backup.
Correct Answer: C
Section: Monitoring & Maintaing (Backup, Restore, Updates, Business Continuity, Disaster
Recovery…) Explanation
Explanation/Reference:
from Microsoft.Press.Exam.Ref.70-417.Oct.2012
Download and install the Windows Azure Online Backup Agent
After you create an account on the Windows Azure Online Backup website, you can download the Windows Azure Online Backup Agent and install it locally. An Online Backup node then appears in the navigation pane of the Windows Server Backup console, as shown in Figure 12-
If you prefer, you can also configure online backups from the Windows Azure Online Backup console, which becomes available after you install the agent. The Windows Azure Online Backup console provides exactly the same set of options as the Online Backup node in the Windows Server Backup console.
Register server
The next step is to register your server. Registering a server enables you to perform backups from that same server only. (Remember this point for the exam.) To register the server, from the Actions menu, select Register Server.
The Register Server Wizard includes two configuration steps. First, you are given an opportunity to specify a proxy server if desired. Second, you are asked to provide a passphrase that will be used to encrypt your backup data and a location to save this passphrase in a file. You need to provide this passphrase when you perform a restore operation, so its essential that you dont lose it. (Microsoft doesnt maintain a copy of
your passphrase.) A Generate Passphrase option creates the passphrase for you automatically.
After you register a server, new options for Online Backup appear in the Actions pane, including Schedule
Backup, Recover Data, Change Properties, and Unregister Server.

QUESTION 29
Your network contains an Active Directory domain named contoso.com.
The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2012. All three servers have the Hyper-V server role installed and the Failover Clustering feature installed.
Server1 and Server2 are nodes in a failover cluster named Cluster1. Several highly available virtual machines run on Cluster1. Cluster1 has the Hyper-V Replica Broker role installed.
The Hyper-V Replica Broker currently runs on Server1. Server3 currently has no virtual machines.
You need to configure Cluster1 to be a replica server for Server3, and Server3 to be a replica server for
Cluster1.
Which two tools should you use? (Each correct answer presents part of the solution. Choose two.) A. The Hyper-V Manager console connected to Server3
B. The Hyper-V Manager console connected to Server2
C. The Failover Cluster Manager console connected to Cluster1
D. The Failover Cluster Manager console connected to Server3
E. The Hyper-V Manager console connected to Server1
Correct Answer: AC Section: Hyper-V Explanation
Explanation/Reference:
steps :
install the Replica Broker Hyper-v “role”
configure replication on Server 3 in Hyper-V manager and mention the cluster (that’s why a replica broker is needed)
configure replication on Cluster 1 using the failover cluster manager. that’s the short version…
if you want to read, here’s the detailed full one :
from Microsoft.Press.Exam.Ref.70-417.Oct.2012
Using Hyper-V Replica in a failover cluster
The configuration steps previously described apply to VMs that are not hosted in a failover cluster. However, you might want to provide an offsite replica VM for a clustered VM. In this scenario, you would provide two levels of fault tolerance. The failover cluster is used to provide local fault tolerance, for example, if a physical node fails within a functioning data center. The offsite replica VM, on the other hand, could be used to recover only from site-level failures, for example, in case of a power outage, weather emergency, or natural disaster.
The steps to configure a replica VM for a clustered VM differ slightly from the normal configuration, but they arent complicated. The first difference is that you begin by opening Failover Cluster Manager, not Hyper-V Manager. In Failover Cluster Manager, you then have to add a failover cluster role named Hyper-V Replica
Broker to the cluster. (Remember, the word role is now used to describe a hosted service in a failover cluster.)
To add the Hyper-V Replica Broker role, right-click the Roles node in Failover Cluster Manager and select
Configure Role. This step opens the High Availability Wizard. In the High Availability Wizard, select Hyper-V Replica Broker, as shown in Figure 12-28 :
When you choose this role, the High Availability Wizard will then ask you to provide a NetBIOS name and
IP address to be used as the connection point to the cluster (called a client access point, or CAP). This step is shown in Figure 12-29. :
Next, you configure the equivalent of the server replication settings shown earlier in Figure 12-13.
———————————————————————————————————————————————
—————- fig 12.13 :
———————————————————————————————————————————————
—————-
To do so, right-click the Hyper-V Replica Broker node in Failover Cluster Manager, and select Replication Settings from the shortcut menu, as shown in Figure 12-30. The difference between the settings here and the settings in Figure 12-13 is that in this case, the settings apply to the entire cluster as a whole. :
On the remote Replica server, you configure replication as you normally would, by configuring Hyper-V Settings in Hyper-V Manager as described in the earlier section named Configuring Hyper-V physical host servers. However, if you want the remote Replica also to be a multi-node failover cluster, then you would need to configure that remote failover cluster through Failover Cluster Manager (by adding and configuring the Hyper-V Replica Broker role).
After you configure the host server settings, you can configure replication on the VM in Failover Cluster Manager just as you would in Hyper-V Manager. Right-click the clustered VM, click Replication, and then click Enable Replication, as shown in Figure 12-31.
This step opens the same Enable Replication wizard that you see when you configure replication on a nonclustered VM. The remaining configuration steps are therefore identical.
For the 70-417 exam, theres a good chance youll be asked about basic concepts related to configuring replication on clustered VMs. Remember first of all that you use Failover Cluster Manager to configure replication for a clustered VM at the primary site but still use Hyper-V Manager at the Replica site. Remember that in Failover Cluster Manager at the primary site, you need to add the Hyper-V Replica Broker role to the failover cluster, and that this role is used to configure Hyper-V Replica server settings for the cluster. Finally, you also need to remember that when you configure Hyper-V Replica in a failover cluster, the CAP name and address are used as the server name and address.

QUESTION 30
You have a server named Server1 that runs Windows Server 2012.
You modify the properties of a system driver and you restart Server1. You discover that Server1 continuously restarts without starting Windows Server 2012.
You need to start Windows Server 2012 on Server1 in the least amount of time.
The solution must minimize the amount of data loss. Which Advanced Boot Option should you select?
A. Repair Your Computer
B. Disable Driver Signature Enforcement
C. Last Know Good Configuration (advanced) D. Disable automatic restart on system failure
Correct Answer: C
Section: Monitoring & Maintaing (Backup, Restore, Updates, Business Continuity, Disaster
Recovery…) Explanation
Explanation/Reference:
last known good configuration is used when a modification made to the registry base prevent the computer to restart normally (like after installing an application for example, or a driver…).

Download Ensurepass Latest 2013 MCSA 70-417 Real Exam Questions , help you to pass exam 100%.